Configured for cold climates or high flow rates. Well suited where incoming water temperature can drop below 45 F. For use in more demanding water usage applications. Self modulating flow sensor technology regulates the amount of energy required to heat the water needed. Digital temperature display showing the outlet water temperature setting. Uses (3) 9 KW standard Emerson electric heating elements with brass tops to prevent electrolysis. Copper heat exchanger. Automatic resettable thermostat. (3) 40 DP breakers required. 112A draw. Required wire: 3 sets 8 AWG. Pipe fitting: 3/4” NPT. Energy efficiency: 99.8%. UL and CSA certified.Weight: 11 lb. Lifetime warranty.
Product Features
- Savings of up to 50% on water heating costs. Dimensions :17H x 17W x 3.625D inches ;Pipes fittings :3/4 inch NPT
- Digital temperature control in 1-degree increments allows control of hot water; Activation Flow: 0.3 GPM
- Copper and stainless components designed for efficiency, durability and easy replacement.
- Compact size saves valuable storage space, while the stylish and advanced design is pleasing to the eye and Copper and stainless components designed for efficiency, durability and easy replacement.
- Prior to purchase & installation, please verify that this model is the right size for your hot water needs and electrical requirements. Electrical requirements: 27 kW, 240 volts, (3) 40 required breakers, 112.5 maximum power (AMP), (3) 8 required wire.Amperage Draw:113 A
- Required Breaker Quantity: Three 40 Amp Double Pole
- Recommended Electrical Panel: 200 Amps
- NEVER run out of hot water with an ECOSMART tankless water heater.
- Save up to 12 cubic feet of storage space.
- Digital temperature control in 1-degree increments gives users complete control of hot water
Warranty issues Over 4 years I have had two issues with this unit. The last occurred yesterday where a pin hole opened up and caused some minor sheetrock damage. There’s a 5 year warranty on this unit, but they declined my warranty request stating that my water was hard (which it isnt) and that I am supposed to do annual maintenance on the unit. These are the facts so be aware
ECO27 Details and Conversion to Boiler Mode – In Depth Some information about this unit (and the entire product line) is sparse, and numerous people have posted inaccurate information as well. First, RTFM. EcoSmart provides a wealth of information online, and all of us would do well to check their site before posting bad information.I have two of these units, one for DHW (Domestic Hot Water) and the other to operate our whole house hot water baseboard system. Some information is hard to find, and other information is a closely…
and they corrode very easily. Ecosmart told me that I should have removed … I wish I had never bought this product. I’ve had to replace the heater elements twice in about 3 years at cost of about $250 for the parts ($85 for 2 elements) plus labor for each incident. I have sunk about a $1,000 into this unit and more failures are to come. The elements seem to be made of copper, and they corrode very easily. Ecosmart told me that I should have removed the elements and soaked them in vinegar to remove mineral buildup every six months or so, which I did not know until just…